VWEIRAUCH-PARTS

Intallation Help Frontnose

At each replica project, due to the conversion, certain difficulties arise.
Generally, we recommend the conversion by a specialist or a specialized company to be led by.

To assist you with your project, we want to offer you images using a little help.
This could also be solution to you, if there are difficulties during installation or need helpfull hints.

In some cases it can through the processing and curing of the material to the Middle Fontnose come in the "slack".
The reason for such cases is the lack of support or the front of the plate, on wich the Frontnose is set.

figure 1 shows such a case :

The solution is simple and straightforward.

By means of threaded bolts and nuts is to solve the alignment quite easily and quickly.

Is quite fast and very effective solution to the following:

The Frontnose is on the left and right wings aligned and assembled.
To the front is placed on the center plate.

Now, in this plate, left and right of the scanner, and two holes drilled at some distance.
11er or 13er metal drill use.
In these wells now have two nuts M10 or M12 alternatively be welded on the top.
Alternatively, you can dispense with the welding and use two nuts to counterattack per well.

Below the plate is a metal carrier, which is mounted on the bumper of impact protection.
Now the mother-mounted by a long threaded screw so used to lift the middle of the range or lower leaves.
This allows alignment of the Immaculate Frontnose and the central region.

The following pictures explain how this is meant.

By turning the screw in or out the front is aligned in the center area.

Fixed .